Home WiFi routers have two IP addresses. One IP connects to an external network such as the internet. Another network communicates with devices located inside the home or office network.
ISPs or Internet Service Providers supply a public IP address for the external connection. The router manufacturer sets a default private IP address that is used for local networking. The default IP address of all Belkin routers is 192.168.2.1.
Belkin Router IP Default Settings:
If you have no idea about IP addresses, here is you can get an idea of what an IP address is. Every router is assigned a default private IP address during manufacturing. The specific value depends on the brand and model of router, and usually, every router from one manufacturer has the same default IP address.
The administrator must know the Belkin Router IP address to connect to the console of the router via a web browser in order to change the wireless password. The value of which depends on the brand model number of the router. If you connect any device to a Belkin router IP with a default IP address, then it can access the router console using a web browser. You just need to enter ‘http://192.168.2.1’ in the address bar of the web browser.
This address is also known as the default gateway address. The client’s devices depend on the router to provide them with the gateway to the internet.
Belkin Router IP Usernames And Passwords:
You will be asked for an admin username and password prior to accessing the router console. You were supposed to change this information when you set up the router for the first time. If you didn’t change it, then here is what you can enter in the default username and password.
- Default Username: admin, Admin or leave the field blank.
- Default Password: admin, password or leave the field blank.
In case you have changed the defaults and can’t remember the new credentials, then you will have to reset the router followed by entering the default username and password. On your Belkin router, you need to press the reset button that is located on the back of the router. Press and hold the reset button for 30-60 seconds.
Resetting Your Belkin Router IP:
When you reset the Belkin router, then all the network settings, including the local IP address and manufacturer’s defaults. Even if an admin has changed the default address before, if you reset the router, then the default address will be changed to the default.
Resetting the router is not something that you would do quite often, but when the router was updated with incorrect settings or invalid data, then that results in no response to admin connection requests.
How To Change The Default IP Settings Of Belkin Router IP:
When you turn on the router, it uses the same private network address unless it is changed by the admin. You should change the default IP address to avoid any IP address conflict with a modem or another router that is already installed on the network.
Many people opt to use an address, which is easy to remember. There is no benefit in network performance or security accomplished from using anybody’s private IP address over another.
When you change the router’s default IP address, it won’t affect other admin settings on the router such as DNS address values, passwords, or network mask. There won’t be any effect on connections to the internet.