DDR3 vs. DDR4 Which is Best?

DDR3 vs. DDR4

Want to Build gaming PC? But confused DDR3 vs. DDR4 , Which is Best? If I ask you that which generation of RAM is installed on your PC then most probably, all of us have DDR3 RAM installed on our PCs. We are living in a world of technology and science. Remember, the time when we stuck in downloads on 2G network. Now, we can download the files fastly on 3G and even very quickly on the 4G network. By the end of 2019, we will be going to have a gift of 5G network. We can say that with time things get more advanced and flexible.

We are living with supercomputers and big servers. What you have now will be going to get more advanced tomorrow. The next technology gets outdated. To build a PC, many components need to be obtained attached. One of them is RAM. The first we got was DDR SDRAM in 2000. This was used very frequently. After three years of DDR SDRAM use, a RAM upgrade was introduced. That is DDR2 SDRAM was invented in 2003. This DDR RAM type will be used widely also for next 04 years. If you are gamer, then checkout best gaming dns servers.

DDR3 vs. DDR4 Which is Best?

In 2007, DDR2 was replaced by DDR3. This DDR RAM type was used mostly by almost all platforms and got great success and popularity. DDR3 stood in the front of a market for the next seven years. Then, five years before now, that is DDR4 was introduced. Now, we are confused which is better DDR3 or DDR4? Basically, in this article, we are going to have a healthy discussion regarding DDR3 vs. DDR4. By the end of this article, you will be going to have a clear picture that whether you have to upgrade to DDR4 SDRAM or not. So, make sure to read the below article completely to get every important update and necessary information.

DDR3 vs. DDR4

Improvements of DDR4

There are some improvements have been made from DDR3 SDRAM to DDR4 SDRAM. While talking about its physical form factor, DDR4 SDRAM a bit taller than compared with DDR3 SDRAM by approx 0.9 mm. Both DDR3 and DDR4 SDRAM offers the same width. The main difference that can be easily found between a physical factor of both RAM types is the number of pins located on both. The later comes with 240 number of pins whereas the former has 288 number of pins. There are mainly four improvements have been made to DDR4 SDRAM as listed below:-

Also Read:-How To Control Iphone From Computer With 5 Easy Steps

Speed and Bandwidth

The Frequency of DDR4 starts at 1600 MHz and goes up to 3200 MHz. Whereas, The frequency of DDR3 starts at 800 MHz and ends at 2133 MHz. DDR3 supports densities of up to 2 GB per chip which is double the density of DDR3. The 1600 MHz means the RAM has a speed of 1600 million operations per second. Therefore, we can say that DDR4 s capable of much more bandwidth than DDR3 because the frequency is directly proportional to the bandwidth of RAM. You must keep in mind that the higher the frequency your RAM has, the higher the latency it will have.

As of now, in the market, you will find 16 GB DDR4 SDRAM in a single stick format, and with server memory, it will boost up to 64 GB on a single stick.

Also Read:-Upload Photos to Instagram From Computer Without Any Software

Voltage and Power Usage

DDR4 RAM will use a lot less power as compared to DDR3 RAM because DDR4 RAM operates on 1.2V whereas DDR3 RAM operates on 1.5V and 1.35V even on power saving mode. If you are thinking to upgrade from DDR3 RAM to DDR4 RAM, then you must know that DDR4 will give you a huge benefit if there are hundreds of servers running the same hardware. In a minor set-up, you can easily go with DDR3.

Apart from that DDR4 RAM comes with a deep power-down mode that will lower down the amount of energy consumption. It will work effectively even while the system remains in standby. We can say that DDR4 RAM will need less power to operate as of course.


One of the main reason that why people choose to upgrade from DDR3 to DDR4 is the capacity. DDR3 does not offer that higher RAM capacity as compared to DDR4. DDR4 features eight dyes per module whereas DDR3 features four dyes per module. DDR4 RAM features a maximum capacity of 512 GB. On the other side, DDR3 features a maximum capacity of up to 128 GB.

Also Read:-Apps to Recover Deleted Files on Android Without Computer 2017

Error Handling

Error handling is the main factor to keep in mind while comparing DDR3 RAM and DDR4 RAM. The reason is while dealing with a large capacity of memory installed in a system, and the system is handling some real-time operations like satellites, traffic systems and much more. Therefore, it can be easily understood the DDR4 RAM best at error detection, correction, and prevention.

Few More Words

Regarding the above meaningful and healthy discussion, we can say that installing the type of RAM depends on the system you are currently using. The fact is DDR3 will fit into servers but for DDR2. Same as DDR4 will not fit into servers built for DDR3. As of now, DDR3 is powering the same performance with regular users. If you work with some servers, then DDR4 is good to go.

To get DDR4 SDRAM compatible with your system, you will need to upgrade your hardware to the latest one. If you are willing to go with higher capacity than it is clear that you should go with DDR4 RAM. On the other hand, DDR3 SDRAM is supported by most of the latest motherboards out in the market today. That’s why, everyone says in the market, DDR3 RAM is still dominant and widely used.

Comment below friends which type of RAM you use and why think to upgrade from DDR3 to DDR4. Also, let us know if you know anything about the difference between DDR3 vs. DDR4 that we have missed above. Stay tuned with us to get all regular updates and the latest information about science, technology, and gadgets. Have a nice day!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.